Ashes from challenging fuels in the circular economy.

In line with the objectives of the circular economy, the conversion of waste streams to useful and valuable side streams is a central goal. Ash represents one of the main industrial side-products, and using ashes in other than the present landfilling applications is, therefore, a high priority. This paper reviews the properties and utilization of ashes of different biomass power plants and waste incinerations, with a focus on the past decade. Possibilities for ash utilization are of uttermost importance in terms of circular economy and disposal of landfills. However, considering its applicability, ash originating from the heat treatment of chemically complex fuels, such as biomass and waste poses several challenges such as high heavy metal content and the presence of toxic and/or corrosive species. Furthermore, the physical properties of the ash might limit its usability. Nevertheless, numerous studies addressing the utilization possibilities of challenging ash in various applications have been carried out over the past decade. This review, with over 300 references, surveys the field of research, focusing on the utilization of biomass and municipal solid waste (MSW) ashes. Also, metal and phosphorus recovery from different ashes is addressed. It can be concluded that the key beneficial properties of the ash types addressed in this review are based on their i) alkaline nature suitable for neutralization reactions, ii) high adsorption capabilities to be used in CO2 capture and waste treatment, and iii) large surface area and appropriate chemical composition for the catalyst industry. Especially, ashes rich in Al2O3 and SiO2 have proven to be promising alternative catalysts in various industrial processes and as precursors for synthetic zeolites.

Pyrolysis behavior, kinetics, and thermodynamics of waste pharmaceutical blisters under CO2 atmosphere.

The disastrous impact of COVID-19 pandemic has caused a significantly increased production and use of pharmaceutical drugs, which is accompanied by the rapid generation of waste pharmaceutical blisters (WPBs). Nonetheless, its treatment has not gained appropriate attentions and a perceptible process development was not achieved. In this study, the WPBs pyrolysis in CO2 atmosphere was conducted as well as the thermodynamics and kinetics were investigated. The thermogravimetric analysis revealed that the WPBs decomposition could be divided into two stages of 25 - 365 °C and 365 - 900 °C with mass loss of 56.5 - 60.5 wt% and 22.5 - 25.9 wt%, respectively. Fourier-transform infrared spectroscopy analysis indicated the dechlorination process initiating at ∼300 °C. The simultaneous asymmetric stretching of HCl and stretching vibration of C-Cl bond was detected in the range of 2600 - 3250 cm-1 and 660 - 750 cm-1, respectively. The dechlorination reactions were almost complete at ∼520 °C and minor peaks (2900 -3100 cm-1) due to C-H vibrations were observed. Gas chromatography-mass spectrometry analysis indicated that the evolved products included alkanes, benzene, olefin, as well as HCl. The cycloalkenes content significantly increased during the second conversion stage, implying the addition reactions between alkanes and olefins. The apparent activation energy was calculated using three model-free methods and the values from Flynn-Wall-Ozawa model increased from 142.0 to 255.8 kJ·mol-1 with an average value of 147.4 kJ·mol-1. The methods of Coats-Redfern as well as Malek were applied to determine the reaction mechanism. The one-dimensional diffusion model was more reliable to describe the WPBs pyrolysis. This study will represent a significant reference case for the thermochemical conversion of multilayer packing waste and facing the increasing demand for the medical waste recycling.